CAME CONNECT RETH001, Руководство пользователя, Страница: 13 / 32

Pa
g.
13
-
FA
01
02
4M
4A
v.
1
1
1/
20
17 ©
Ca
m
e S
.p.
A.
ENGLISH
General Precautions
•
Always cut off the mains power when doing cleaning and
maintenance jobs.
•
This product must only be used for its specifically intended
purpose. Any other use is dangerous.
•
The manufacturer declines all liability for any damage as a
result of improper, incorrect or unreasonable use.
Description
Module for remotely controlling one or more CAME operators, via
CAMEConnect. This device must be used as master module and
can control up to five slave modules associated to it, which in turn
can control one or more operators.
Description of parts
🅰
❶
red, POWER LED
❷
green, NETWORK LED
❸
yellow, CONNECT LED
❹
LAN socket for connecting the module to an Ethernet network.
❺
Power-supply connector.
❻
P1 BUTTON.
When pressed for 10 seconds it resets the module to its fac-
tory settings.
When pressed for three seconds, it restarts the module.
To start the module with the preset 192.168.6.6 static IP,
proceed as follows. With the module powered OFF, press and
keep pressed the P1 button; power on the module by keep-
ing the P1 button pressed for about four seconds; release
the button when the green LED (
❷
NETWORK LED) flashes
quickly.
❼
Power-supply unit with micro-USB connector.
❽
ETH (LAN) cable.
Alert LED
Legend of LED symbology
Off, On,
Flashes once per second,
Flashes twice per second,