CAME BPT 69409200, Инструкция по установке и эксплуатации

Страница: 46 / 112

B
C
TH450
A
Page
18
- Manual
FB00799-EN
- ver
. 1
- 07/2017 - © C
AME S.p.A. - The cont
ents of this manual ar
e subject t
o change at any time without prior notice.
Activate MANUAL operating
mode.
Press button P
A
.
Changing the temperature sensor calibration
If the device is in a position that means that it is difficult for it to detect the correct temperature,
it is possible to modify the temperature detected by ± 3 °C in increments of a tenth of a degree.
Press and use the but-
tons to set the desired activation
times
B
.
Press again and use the
buttons to set the desired activa-
tion days
C
.
The program composed in this way is activated immediately and remains active until the
set time runs out. The device then goes back to operating in the mode it was in before
the activation of the timed manual program.
To go back to AUTOMATIC operation before the end of the programmed time, press .