CAME BPT 69409200, Инструкция по установке и эксплуатации

Страница: 47 / 112

TH450
B
TH450
A
Page
19
- Manual
FB00799-EN
- ver
. 1
- 07/2017 - © C
AME S.p.A. - The cont
ents of this manual ar
e subject t
o change at any time without prior notice.
Activate MANUAL operating
mode.
Press button P until the
indi-
cation appears on the display A .
Enabling/disabling automatic advance
This function (only active in heating mode) enables the device to automatically adapt the
exact moment when the system comes on in order to ensure the desired temperature at
the set time. The advance is calculated according to the difference between the measured
temperature and the set temperature, and can reach up to a maximum of three hours
prior to the time at which the temperature to be reached is set.
Example of operation
If the device is programmed to be at a temperature of 20 °C at 7 am and the automatic
advance feature has not been activated , the system will come on at 7 am but will not
guarantee a temperature of 20 °C at 7 am. If
the automatic advance feature has been
activated the programmable thermostat will turn the system on in advance in an attempt to
reach 20 °C at 7 am. Thanks to a self-learning mechanism, the programmable thermostat
stores the room’s temperature parameters in order to be more precise, in subsequent
days, in achieving the set temperature objective.
Use the
B
buttons to set
the desired compensation value.
N.B. The setting is saved in the
permanent device memory.