Page
31 - Manual
FB00800-EN - ver
. 1 - 07/2017 - © C
AME S.p.A. - The cont
ents of this manual ar
e subject t
o change at any time without prior notice.
List of commands that can be sent
to the programmable thermostat via text message
Default text message
Customised text
message
Confirmation text message from
TH/450 GSMGSM
Request thermostat status
# 01 <STATUS ?>
# 01 <…>
MODALITÁ = XXXXXX TEMP = xx.x,
Setting modes and temperature
detected
STAGIONE = XXXXXX,
Season setting detected
ANTIGELO = xx.x,
Frost protection temperature setting
detected
PRESENZA RETE
Mains status detected
Setting AUTOMATIC mode
# 02 <AUTO>
# 02 <…>
Setting WILDCARD mode
# 05 <JOLLY>
# 05 <….>
Setting MANUAL mode
and the desired temperature*
# 04 <MAN> = xx.x
# 04 <…> = xx.x
*Manual mode also requires you to set the tem-
perature where "xx.x" represented the desired/
detected temperature (for example 24.7)
Setting the season mode to SUMMER
# 06 <SEASON = SUMMER> # 06<…>
STAGIONE ESTATE TEMP = xx.x
Setting the season mode to WINTER
# 07<SEASON = WINTER> # 07<...>
STAGIONE INVERNO TEMP = xx.x
Setting FROST PROTECTION mode
# 16 <FROST PROTECTION> # 16<...>
STAGIONE ANTIGELO TEMP = xx.x
Switching off the system
# 03 <SYSTEM = OFF>
# 03<...>
IMPIANTO OFF TEMP. = xx.x
To reactivate a programmable thermostat that is in FROST PROTECTION or OFF mode,
you need to send two different messages: one that specifies the season (SUMMER-
WINTER) and one that activates the desired mode (AUTO - JOLLY - MAN).
