Page 13 of 20
CV-603 MPROXBLE CONTROLLER / CV-603PS-K1 MPROXBLE CONTROLLER CABINET KIT
INSTALLATION INSTRUCTIONS
8. SAFETY WARNINGS
These warnings are an integral and essential part of the product,
and must be delivered to the user. Read them carefully: they provide
important installation, operating, and maintenance instructions. Keep
this form and give it to any persons who may use the system in the
future. Incorrect installation or improper use of the product may cause
serious danger.
9. INSTALLATION INSTRUCTIONS
•
Installation must be performed by a qualified professional and
must observe all local, state, national and European regulations.
•
Before starting installation, make sure that the product is in perfect
condition.
•
Laying, electrical connections, and adjustments must be done to
“Industry Standards”. The product must be installed in a box not
accessible to the operator.
•
Do not install the product in an explosive environment or in an area
disturbed by electromagnetic fields.
•
The presence of gas or inflammable fumes is a serious safety
hazard.
•
Provide an overvoltage protection, mains/knife switch and/or
differential on the power network that is suitable for the product
and conforming to current standards. The manufacturer declines
any and all liability if any incompatible devices and/or components
are installed that compromise the integrity, safety, and operation of
the product.
•
Only original spares must be used for repair or replacement of
parts. The installer must supply all information regarding the
operation, maintenance, and use of individual components and of
the system as a whole
10. MAINTENANCE
To guarantee the efficiency of the product, it is essential that qualified
professionals perform maintenance at the times and intervals required
by the installer, by the manufacturer, and by current law. All installation,
maintenance, repair and cleaning operations must be documented.
The user must store all such documentation and make it available to
competent personnel.
FCC:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications made to this equipment not expressly
approved by Camden Door Control could void the user’s authority to
operate the equipment.
TERMS AND LIMITS OF WARRANTY
Refer to Camden’s warranty online for details.
https://www.camdencontrols.com/about/product_warranty
Содержание CV-603
Страница 12: ......
