Camco VORTEX 3 QUADRO, Руководство пользователя

Страница: 27 / 42

5 OPTIONS
0
1
2
3
4 5
6
7
8
9
0
1
2
3
4 5
6
7
8
9
0
1
2
3
4 5
6
7
8
9
0
1
2
3
4 5
6
7
8
9
USER MANUAL
VORTEX 3 QUADRO
P.26
USER MANUAL
VORTEX 3 QUADRO
P.27
These sequences are repeated for 30 seconds (timeout). Then the On LEDs
return to their normal function.
To change CAI addresses, turn the appropriate volume potentiometer to the
required address of amplifier A/B (Volume Pot Ch A => T
ens , Volume Pot
Ch B => U nits ). The address of amplifier C/D is automatically set to address for
amplifier A/B plus one.
To adjust the address you can use the scale markings of the potentio-
meters. You will find the digits 0,1,...,9 on the 10 scale spacing .
The current selected address of amplifier A/B will be immediately displayed
but NOT automatically stored or activated! After each turn of pot you have
another 30 seconds to timeout. You can leave this procedure without saving
the new addresses by briefly pressing the Enter-Switch or waiting for timeout
(as described above).
To store and activate the new addresses you have to press the Enter-Switch
for 3 seconds. These new addresses are stored in an EEPROM, which holds the
information even if the amp is subsequently disconnected from mains. Be sure
to set the CAI-Master-PC to these new addresses. If not, the communication will
be interrupted.
5.1.3 CAI Status Indicator
This green LED indicates the presence of communication between PC and the
amp.