CAMBRIONIX ThunderSync2-16, Руководство пользователя

Страница: 19 / 37

Thundersync2-16 Page 18 of 35
5.5.2 LiveViewer
LiveViewer is an application downloaded from www.cambrionix.com/products/liveviewer . Once
downloaded and installed on the host computer, LiveViewer allows you to switch the ports on and off
and set the port mode. LiveViewer’s home page shows the hubs available, by selecting a hub you can
obtain the following information about all the ports:
• Status (Attached/disconnected)
• Mode (Charge/Sync/Off)
• Profile (Charging profile)
• Duration (How long the device has been attached)
• End time (Time the battery reaches a threshold (full) level)
• Current (Quick charge current in mA)
• Energy (Present energy rate)
Tick boxes adjacent to each port symbol allow that port mode to be changed when the "enable port
controls" is selected. LiveViewer shows the hub rail voltages, time since switched on, total current and
power, and temperature. Further details on LiveViewer are available on our website.
www.cambrionix.com/products/liveviewer
NVRAM settings
Within your hub, there are some specific controllable settings called "non-volatile RAM settings",
which are referred to as NVRAM settings. These are a variety of different settings for your
Thundersync2-16.
You can navigate to the NVRAM settings by opening LiveViewer and selecting the hub you want to
connect to. Once you have chosen the connected hub, navigate to the below icon on the top right of
the screen from LiveViewer and then clicking advanced on the bottom of the page
Once you have pressed advanced this will take you to the advanced settings page where you can
view and change the NVRAM
settings, including reverting back to default factory settings.
Setting name Description
Default
value
Friendly Name
Define the friendly name for this device. Limit of 31 characters.
This name will appear in the device's system information if set.
Empty