Page | 10
LP (Propane) Gas Supply Cylinder Disconnection
1. Turn the burner valves off.
2. Turn the tank valve off. (Turn clockwise to stop.)
3. Detach the regulator assembly from the tank valve by turning the quick coupling nut
counterclockwise.
LP (Propane) Tank Removal, Transport, and Storage
-
Turn OFF all control knobs and LP tank valve. Turn coupling nut counterclockwise by hand only -
do not use tools to disconnect. Lift LP tank wire upward off of LP
tank collar, then lift LP tank up and off of support bracket. Install
safety cap onto LP tank valve. Always use cap and strap supplied
with valve. Failure to use safety cap as directed may result in
serious personal injury and/or property damage.
-
A disconnected LP tank in storage or being transported must have a
safety cap
installed (as shown). Do not store an LP tank in
enclosed spaces such as a carport, garage, porch, covered patio or
other building. Never leave a LP tank inside a vehicle which may
become overheated by the sun.
-
Do not store LP tank in an area where children play.
LP (Propane) Tank Filling
-
Use only licensed and experienced dealers.
-
LP dealer must purge tank before filling.
-
Dealer should NEVER fill LP tank more than 80% of LP tank volume. Volume of propane in tank will
vary by temperature.
-
A frosty regulator indicates gas overfill. Immediately close LP tank valve and call local LP gas
dealer for assistance.
-
Do not release liquid propane (LP) gas into the atmosphere. This is a hazardous practice.
-
To remove gas from LP tank, contact an LP dealer or call a local fire department for assistance.
Check the telephone directory under “gas companies” for nearest certified LP dealers.
LP (Propane) Tank Exchange
-
Exchange your Type 1 cylinder with OPD safety feature-equipped ONLY.
-
Always keep new and exchanged LP tanks in upright position during use, transit, or storage.
-
Leak test new and exchanged LP tanks BEFORE connecting to grill.
Содержание HEAT HTSB1
Страница 26: ...Page 26 This page left intentionally blank ...