CAMBRIDGE CSW-15AT, Инструкции по установке, настройке и эксплуатации

Страница: 12 / 14

12
4.0 COMMUNICATIONS SETUP
4.1 Communications Menu Definitions:
R1 Baud Rate 1200 to 115200 baud (9600) Default.8, n, 1
R2 Output 0 Gross, Tare, Net (Default)
Format “CR, LF, CR, LF [32 bytes of 2Eh], CR, LF, CR, LF, Gross (lb or kg),
:, six ASCII characters [indicated weight], CR, LF, Tare (lb or kg), sp,
:, six ASCII characters [indicated weight], CR, LF, CR, LF, CR, LF,
CR, LF” [100 bytes total output].
kg),
1 (Weight only) “Six ASCII characters [indicated weight], CR, CF” [8
bytes total output].
2 (Net only) “NT, Sp, Six ASCII characters [indicated weight], Sp, lb or
kg, CR, LF” [14 bytes total output].
3 (Gross only) “GR, Sp, Six ASCII characters [indicated weight], Sp, lb
or kg, CR, LF” [14 bytes total output].
R3 Output Type 0 O
utput on command. Standard Print. ( Default )
Output as selected by R2 Output Format. If “Q” is received
on the serial port the scale will output the same as if the
PRINT/ENTER key is pressed. The same holds true for:
Z = ZERO
U = lb/kg,
D = GRS/NET
T = TARE
1 Slave Display output (numeric only) continuous Stx, Six
ASCII Characters (indicated weight), CR, LF (9 Bytes total output).
2 Slave Display output (alphanumeric) continuous Stx, GR, NT, or TR,
Six ASCII Characters (indicated weight), lb, kg, CR, LF [15 bytes
total output].
3 RF Link Output.
4 Used for QSI Terminal.
R4 Receiver 0 Disabled (Normal Scale Mode). (Default)
1 Standard Receiver. Receives R3-3 RF Link output string, displaying data
as it appears on the scale. All keys are disabled with the exception of the
PRINT/ENTER Key. Pressing the PRINT/ENTER key will cause this port
to print.
2 Remote control. Receives R3-3 RF Link output string, displaying data as
it appears on the scale and allows full control of all scale meter functions.
END
Exits back to main menu
( ) Indicates Factory default setting