MR Confon Starter f MKII+ User Guide
071-CRS-N3001-R01
22
AudioFile Setup
Should it be necessary to connect the AudioFile USB sound processor to your
amplifier, you may do so at this point. If not, please skip this section.
Figure 28 : The AudioFile
AudioFile supports two different modes of operation.
•
AudioFile Mode: Buffered playback of WAV encoded stereo audio
files
•
USB Audio Mode: Real time streaming of audio directly from a
suitable host computer
AudioFile is shipped with
AudioFile mode
active. You can read more about
AudioFile mode
and its timing capabilities in the separate
AudioFile User
Manual
.
AudioFile
mode requires other specialised equipment to be installed which
generates TTL-compatible triggers and track selection codes. As this manual
only concerns the installation of AudioFile, it will simply be necessary to make
sure that all the components have been successfully connected.
To test AudioFile without triggering equipment, it needs to be booted into
USB
Audio mode
. In this mode, AudioFile is automatically recognized by your
computer as USB sound card and can play an audio stored locally on the
computer.
