MR Confon Starter f MKII+ User Guide
071-CRS-N3001-R01
18
Use Cables 3 and 6 to connect the Filter Box to the RF Filter Panel as shown in
Figure 21. If the RF Filter Panel does not already have a pair of unused bulkhead
BNC connectors installed, then arrange for the Panel to be modified with the set
of BNC bulkhead connectors that are included in the package.
Figure 21: Connecting the Filter Box to the Penetration Panel
Connecting the Desktop Monitor Speakers
The Desktop Monitor Speakers are powered by the amplifier and do not require
a separate power supply. Connect Cable 8, the speaker cable to the
Stim Mon
port of the amplifier. In Figure 22 notice that the Cable 8 has two types of wires
to connect to the speakers - an insulated and a braided wire. The insulated wire
is inside its own plastic housing while the braided wire is naked.
Figure 22 : Speaker Cable Detail
