Cambium PTP 450 series, Руководство пользователя

Страница: 31 / 180

Backhaul Slave (BHS) PTP 450 User Guide
ptp-450 (July 2014)
1-11
Interface Function Cabling
3.5 GHz -45 degree antenna connection 50 ohm RF cable, N-type
3.6 GHz -45 degree antenna connection
5 GHz Vertical antenna connection
External antenna cable, path B 50 ohm RF cable, N-type
3.5 GHz +45 degree antenna connection
3.6 GHz +45 degree antenna connection
5 GHz Horizontal antenna connection
BHS diagnostic LEDs
The diagnostic LEDs report the following information about the status of the module. The BHS LEDs provide
different status based on the mode of the BHS. An BHS in “operating” mode will register and pass traffic normally.
An BHS in “aiming” mode will not register or pass traffic, but will display (via LED panel) the strength of received
radio signals (based on radio channel selected via Tools , Alignment ).
The LED color helps you distinguish position of the LED. The LED color does not indicate any status.
Figure 9
BHS diagnostic LEDs, viewed from unit front
BHS LED Display LED Labels
LNK/5 ACT/4 GPS/3 SES/2 SYN/1 PWR
The LED display of the 3.5 GHz and 3.6 GHz BHSs appear a bit different from the existing and 5 GHz 450 BHSs.