
Chapter 3: System planning
Site planning
Page 3-7
Site planning
This section describes factors to be considered when choosing sites for PMP or PTP radios, power
supplies, CMM4 (if applicable) and UGPS (if applicable).
Site selection for PMP/PTP radios
When selecting a site for the ODU, consider the following factors:
Height and location to ensure that people are kept away from the antenna; see
Calculated
distances and power compliance margins
on page
4-24
.
Height and location to achieve the best radio path.
Indoor location where the power supply LED indicators will be visible, so the drop cable length
will not exceed the maximum recommended length; see
Power supply site selection
on page
3-8
.
Ability to meet the requirements specified in
Grounding and lightning protection
on page
3-8.
Aesthetics and planning permission issues.
Cable lengths; see
Error! Reference source not found.
on page
2-25
.
The effect of strong winds on the installation; see
ODU wind loading
on page
3-11
.
Содержание PMP 450 Series
