manualshive.com logo in svg

Cambium Networks PMP 400 Series, Конфигурация и руководство пользователя, Страница: 33 / 98

Поделиться
Скачать
Cambium Networks PMP 400 Series Скачать руководство пользователя страница 33

PMP 400/430 and PTP 200/230 Series Configuration and User Guide

 

pmp-0042 (March 2014)

 

 

Page 32 of 98

 

Wireless Manager is used to manage and monitor Canopy modules. However; the standalone CNUT tool 
must be used to upgrade radio software. 
 
CNUT 3.20.19 (Canopy Network Updater Tool) is the stand-alone software update tool for PMP 400/430 and 
PTP 200/230 Series products.. CNUT is available at 

http://www.cambiumnetworks.com/support

 under 

“Management Tools”. 
 
PMP 400/430 and PTP 200/230 equipment may also be managed by SNMP queries based on the Canopy 
MIB (Management Information Base) objects.  
 
Release 11.0 adds support for RADIUS (Remote Authentication Dial In User Service) protocol supporting: 

 

SM Authentication

 allows only known SMs onto the network (blocking “rogue” SMs),

 

and can 

be

 

configured to ensure SMs are connecting to a known network (preventing

 

SMs from 

connecting to “rogue” 

A

Ps). RADIUS authentication is used for SMs, but

 

not used for APs, 

BHMs, or BHSs.

 

 

 

SM Configuration

 configures authenticated SMs with MIR (Maximum Information

 

Rate), CIR 

(Committed

 

Information Rate), High Priority, and VLAN (Virtual LAN)

 

parameters from the 

RADIUS server when an SM registers to an AP.

 

 

 

Centralized AP and SM user name and password management

 allows AP and

 

SM 

usernames and access levels (Administrator, Installer, Technician) to be centrally

 

administered 

in the RADIUS server instead of on each radio and tracks access

 

events (logon/logoff) for 

each username on the RADIUS server. BHMs and BHSs do

 

not support RADIUS accounting. 

This accounting does not track and report specific

 

configuration actions performed on radios or 

pull statistics such as bit counts from the

 

radios. Such functions require an 

E

lement 

Management System (EMS) such as Cambium Wireless Manager. This accounting is not the 
ability to perform

 

accounting functions on the subscriber/end user/customer account.

 

 

Specifications 

PMP 430 (5.4 and 5.8 GHz) products are sold in the following formats: 

 

SM - Radio with integrated antenna 

 

AP - Kitted, connectorized radio (antenna included) 

 

AP – Connectorized radio (antenna provided by operator) 

PMP 400 (5.4 and 4.9-GHz) and PTP 200 (5.4 and 4.9-GHz) products are sold in the following formats: 

 

SM/BH - Radio with integrated antenna 

 

AP/SM/BH - Connectorized radio (antenna provided by operator) 

 

AP - Kitted, connectorized radio (antenna included) 

PTP 230 (5.4 and 5.8 GHz) products are sold in the following format: 

 

SM/BH - Radio with integrated antenna 

 

The specifications for each format are listed in the following sections. 

Содержание PMP 400 Series



































































































Отзывы:

Нет отзывов