manualshive.com logo in svg

Cambium Networks PMP 400 Series, Конфигурация и руководство пользователя, Страница: 12 / 98

Поделиться
Скачать
Cambium Networks PMP 400 Series Скачать руководство пользователя страница 12

PMP 400/430 and PTP 200/230 Series Configuration and User Guide

 

pmp-0042 (March 2014)

 

 

Page 11 of 98

 

Purpose 

Cambium Networks documents are intended to instruct and assist personnel in the operation, 
installation and maintenance of the Cambium equipment and ancillary devices. It is 
recommended that all personnel engaged in such activities be properly trained. 
Cambium disclaims all liability whatsoever, implied or express, for any risk of damage, loss or 
reduction in system performance arising directly or indirectly out of the failure of the customer, 
or anyone acting on the customer's behalf, to abide by the instructions, system parameters, or 
recommendations made in this document. 

Cross references 

References to external publications are shown in 

italics

. Other cross references, emphasized 

in 

blue text

 in electronic versions, are active links to the references. 

This document is divided into numbered chapters that are divided into sections. Sections are 
not numbered, but are individually named at the top of each page, and are listed in the table of 
contents. 

Feedback 

We appreciate feedback from the users of our documents.  This includes feedback on the 
structure, content, accuracy, or completeness of our documents.  Send feedback to email 
support (see ‘Contacting Cambium Networks’). 
 

 

 

Содержание PMP 400 Series



































































































Отзывы:

Нет отзывов