03/08
6
03/08
ULP Wired Mini
User manual
5 Communication Protocols
UART Sentences
MWV Wind Speed and Angle
1 2 3 4 5
| | | | |
$--MWV,x.x,a,x.x,a*hh
1) Wind Angle, 0 to 360 degrees
2) Reference, R = Relative, T = True
3) Wind Speed
4) Wind Speed Units, K/M/N
5) Status, A = Data Valid
6) Checksum
MWV Sentence 4800bps 8N1
6 General information
General recommendations
Regarding mounting the unit, align the north mark (the circle on the side) of the ULP Wired
Mini towards the north. Make sure to install the sensor in a location
free from anything that
obstructs the flow of wind to the sensors within a 2 meter radius
.
Maintenance and repair
The ULP Wired Mini does not require great maintenance thanks to the lack of the moving
parts in this new design.Transducers must be kept clean and aligned. Impacts or inco-
rrect impulsive handling may lead to transducers misalignment. The space around the
transducers must be empty and clean. Dust, frost, water, etc... will make the unit stop wor-
king. The ULP Wired Mini can be wiped clean with a damp cloth being careful to not touch
the transducers.
Warranty
This warranty covers the defects resulting from defective parts, materials and manufac-
turing, if such defects are revealed during the 24 months after the purchase date. Warran-
ty is void in case of non-following the instructions of use, repair or maintenance without
written authorisation.
Any wrongful use given by the user will not incur in any responsibility on part of Calypso
Instruments. Therefore, any harm caused to the ULP Wired Mini by a mistake will not be
covered by the waranty. Using assembly elements different from those delivered with the
product will void the warranty. Changes on transducers position/alignment will void any
warranty. For further information please contact Calypso Technical Support through
or visit
www.calypsoinstruments.com
.
7
