Calsense
8
CS3000 Quick Start Guide
Measuring Flow
1.
From the Main Menu, use
↓
to navigate to
POCs
and press
SELECT
. The POCs menu displays.
2.
Navigate to
Flow Meters & Master Valves
and press
SELECT
. The Flow Meter & Master Valves
screen displays (Figure 9). The pane on the left displays the POCs attached to this controller
while the right shows the settings for each.
Figure 9 - Flow Meters & Master Valves screen
3.
Press
SELECT
to enter the right side to adjust the schedule.
4.
Use
←↑→↓
to navigate through the screen and
+
/
–
to change values, setting the following
values:
POC used for
– Either Irrigation, Non-Irrigation, or Not Used. If there is no flow meter or
master valve connected to this POC, select Not Used.
Flow Meter
– The flow meter type. This can be either a Calsense FM series flow meter,
such as an FM-1.5B, an insertion-style flow meter (model FMBX), or a hydrometer.
Master Valve
– The master valve type, either Normally Open or Normally Closed.
5.
Press
NEXT
to move to the next POC and repeat step 4 to set each POC’s settings.
6.
Once done, press
BACK
to return to the Main Menu.
Manually Watering a Station
1.
From the Main Menu, use
↓
to navigate to
Manual & Test
and press
SELECT
. The Manual &
Test menu displays.
