manualshive.com logo in svg

Calrec Zeta, Руководство оператора

Поделиться
Скачать
Calrec Zeta Скачать руководство пользователя страница 58

58  Zeta

 

Digital Broadcast Production Console

once the user has the meters set up 
as desired, the configuration can be 
saved, so that it can be recalled at a 
later date.  a configuration consists of 
the values set on the SetUP screen 
and the layouts designed on the 
layoUt screen.  

The currently active configuration will be 
shown at the top of the Setup and Layout 
screens, and the configuration currently 
being viewed/edited on the screens will be 
shown underneath.  

Save to File, Load into Desk

Changes to the configuration being 
viewed/edited will not take effect until 
SAVE TO FILE LOAD INTO DESK is 
selected.  Then the changes will be 
transmitted to the console and saved to 

C:/zeta/cust1/meter

.  

If any changes are made to the 
configuration, the SAVE TO FILE LOAD 
INTO DESK button will flash (until 
selected) to indicate that the changes to 
the configuration being viewed/edited 
have not yet been saved and loaded onto 
the console.

Open File

Open  File will allow a previously saved 
meter configuration to be chosen.   When 
a file is opened,  the configuration will be 
loaded into the front end screens as “the 
meter configuration being viewed/edited”, 
it is not sent straight to the control surface.  

The settings can then be edited if desired 
and when they are ready to be used by 
the control surface select Save to File 
Load into Desk.  The revised file will be 

SaVIng and reStOrIng meter COnfIguratIOnS

saved and the settings sent to the control 
surface.

Save to File

Save to File will save the configuration 
being viewed/edited to 

c:/zeta/cust1/

meter 

without loading it onto the console.

Open Active Config

Open Active Config retrieves the settings 
that the control surface is using and 
displays them on the front end screens 
replacing the current configuration being 
viewed/edited. 

Save Options to Disk and Flash

As the meter setup screens are part of 
the options set of screens, it is important 
to save the options to disk and flash once 
the meter arrangement is set up.  

The Options screens are used to pre-
set the system to the studio’s required 
settings.  These settings are not stored 
in the individual console memories but 
are saved and loaded separately using 
the buttons at the bottom of the screen.   
Although the meter arrangement itself 
is saved separately, its active state on 
the console has to be saved using these 
buttons. 

Changes to options take effect as soon 
as they are made.  However, if they are 
not saved, the next time the desk boots 
up the options will revert to their previous 
settings, which could mean that a different 
meter arrangement is loaded onto the 

console.  This could cause problems 
should the console have to be reset during 
a live broadcast.  It does however allow 
changes to be tried out without losing 
the original settings and these original 
settings can be restored without having to 
re-boot the system.

Содержание Zeta

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды