manualshive.com logo in svg

Calrec Zeta, Руководство оператора

Поделиться
Скачать
Calrec Zeta Скачать руководство пользователя страница 102

102 Zeta

 

Digital Broadcast Production Console

The Hydra I/O Rack offers the ability 
to carry mic/line input and line output 
circuits; and digital inputs and outputs via 
the networking system to one or more 
Calrec digital consoles. 

Modular Structure 

There are 14 modular slots across the 
width of the unit, labelled A to N.  Input, 
output, processor and DC PSU modules 
fit into these slots, in accordance with 
the requirements of the installation.  
Input and output modules receive and 
transmit either analogue or digital audio 
signals, dependant on type, to the Gigabit 
interface processor via a 32 bit TDM buss. 

All 14 slots may be used by any of the 
modules in any combination.  However, it 
is advised that the three slots at the right 
hand side of the unit are best occupied 
by a processor control unit and provision 
for two DC PSU modules, the second 
of which would be the optional hot-
spare.  If no spare DC PSU is present, 
either a blank panel must be fitted or the 
processor unit could move into slot M 
allowing a twelfth input or output module 
to be fitted into slot L.

Input and output modules are available 
with or without ground lift switches.  On 
modules with switches fitted, the ground 
is lifted if the switch is toggled to the right.

mOdular I/O bOx

Dimensions

Each modular unit is 1.2 inches (30.48 
mm) wide.

Module Extraction

In some applications, it is envisaged 
that modules within the Hydra I/O Rack 
could occasionally be changed according 
to changing requirements.  To aid this 
operation, a module extraction hole is 
located on the module front panels.  The 
module slides into the Hydra I/O Rack 
on two runners, one each at the top and 
bottom of the rack.  The rear interface 
connector on the module then locates into 
the appropriate connector located on the 
backplane.  To aid accurate plugging-up, 
some guide strips are located between 
the three interface connectors on the 
backplane.

External Connections

All external connections are located on 
the front face of the Hydra I/O Rack.  
Space must be allowed in excess of the 
box dimensions to feed cables to the front 
interface from any rear access routes.

Mounting

The Hydra I/O Rack is mounted in place 
using 4 fixing screws on each side 
angle bracket. No additional support is 
necessary.

Fan Operation

To dissipate the heat, 3 low-noise fans 
are located in the rear of the Hydra I/O 
Rack. They are controlled from the DC 
power supply unit.  The rack’s rear panel 
has venting holes which must not be 
obstructed in any way.
 
If the ambient temperature within the 
rack is below 50°C (122°F) the fans are 
inactive.  

Between 50°C (122°F) and 55°C (131°F) 
they are operating at slow speed. 

Between 55°C (131°F) & 60°C (140°F) 
the speed increases to fast.   

When the internal ambient temperature 
reaches 60°C (140°F), the OVER TEMP 
red LED on the DC power supply unit will 
light.  

Over 70°C (158°F) the DC power supply 
unit is disabled, but the fans will continue 
to function. 

Earthing 

The box is fitted with an external earth 
stud on the rear, for connection to an 
external earthing system.  No AC mains 
power is contained within the rack.  All 
power connections should be un-plugged 
prior to removing the earth connection.

Optional Rack-Mounted AC Power 
Supply Unit 

A 2U rack-mounted power supply is 
available to provide the DC power for the 
Hydra I/O Rack.  This holds up to four AC 
PSU modules.  One module could provide 
power for a fully populated Hydra I/O 
Rack, with a second providing redundancy.  
Two other modules could be fitted to 
power a second Hydra I/O Rack. 

Dimensions

7U X 482mm (19 inch )

Depth

265mm (10.4 inches)

Содержание Zeta

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды