^PING
Ping an IP address
This command performs a ping for a given IP address or domain name.
Default:
N/A
Storage:
NA
Command values:
^PING=
<
domain name or IP address
>
Ping the domain name or IP address
^LTPH
Periodically Ping an IP address
This command performs a periodic ping for a given IP address or domain name.
Default:
0.0.0.0,0.0.0.0,0,0,0
Storage:
&W
Command values:
^LTPH
=
<Address 1>,
<Address 2>,
<timer>,<acceleration timer>,<failure count>
Where:
<Address 1>
Primary address to ping
<Address 2>
Backup address to ping
<timer>
The periodic time to ping in secs (e.g. every 60 seconds)
<acceleration timer> The periodic time in secs to revert to if a ping fails
<failure count>
The number of pings that can fail to trigger a reboot.
^LTPH?
Queries ltph configuration
Where:
<Address 1>
Primary address to ping
<Address 2>
Backup address to ping
<timer>
The periodic time to ping in secs (e.g. every 60 seconds)
<acceleration timer> The periodic time in secs to revert to if a ping fails
<failure count>
The number of pings that can fail to trigger a reboot.
<reset count> The number of times the modem has been reset.
CDM800 Series V.250 Manual
Page 30 of 33
To suit software version 1.52.2
4/4/2008
