^MACA
Set the LAN Ethernet MAC address
This command will set the LAN interface Ethernet MAC address.
To reset the MAC address back to the factory configured address use the command
“AT^MACA=” and then reboot the router.
Default:
factory unique
Storage:
&W
Command values:
^
MACA
=
<MAC Address> Sets the Ethernet MAC address.
^
MACA?
Queries the current Ethernet MAC address.
^IFCG
Print the Interface Configuration
This command will print the cellular router’s IP interface configuration details.
Default:
N/A
Storage:
N/A
Command values:
^
IFCG?
Prints the router’s IP interface configuration details.
^PPPOE Enable
PPPoE
Mode
Enables or disables PPPoE mode.
Default:
0
Storage:
&W Command
Command values:
^PPPOE=0
Disable PPPoE mode.
^PPPOE=1
Enable
PPPoE
mode.
^MASQ
Enable DNS masquerade.
Enables or disables DNS masquerading.
Default:
0
Storage:
&W Command
Command values:
^MASQ=0
Disable DNS masquerading.
^MASQ=1
Enable
DNS
masquerading.
CDM800 Series V.250 Manual
Page 25 of 33
To suit software version 1.52.2
4/4/2008
