background image

8  

 

 

Proprietary Information: Not for use or disclosure except by written agreement with Calix. 

 

Chapter 1 

GigaSpire Mesh BLAST u6me Overview 

REPLACE ALL OF THIS WITH U6ME OVERVIEW XXXX

 The Calix GigaSpire 

BLAST® u4 is a new generation smart home system that extends the access network into the 
home and acts as a strategic location for control of the ultimate WiFi experience. In addition 
to supporting broadband connectivity of data and video services, this intelligent, 
high-performance system offers the latest 802.11ax ‘Wi-Fi 6’ technology. The GigaSpire 
BLAST u4 provides switching and routing functions that support multi-Gigabit throughput 

for IPTV video and data services. 

Note:

 The GigaSpire BLAST u4 and the GigaSpire Mesh BLAST u4m share the same 

physical footprint. Mounting is identical although features vary depending on the roll the unit 
plays in the network. 

The GigaSpire BLAST u4 is a premium smart home system that delivers the latest ‘Wi-Fi 6’ 

certified technology (802.11ax). The GigaSpire BLAST u4 uses a Gigabit Ethernet link at the 
subscriber's premises to provide carrier-class Wi-Fi and Gigabit Ethernet interfaces for 
customer multi-media devices. The GigaSpire BLAST u4 enables residential subscribers to 
receive Gigabit broadband data and Internet Protocol (IP) video services. Using the latest 
802.11ax technology in both the 2.4 and 5 GHz radios, the GigaSpire BLAST u4 

incorporates dual band 2x2 streams of Wi-Fi delivery (2x2 @ 2.4 GHz and 2x2 @ 5 GHz). 
In addition, with multi-user multiple-input and multiple-output (MU-MIMO) plus 
beamforming, the GigaSpire BLAST u4 allows service providers to extend the access 
network inside the home and establish a strategic location for the delivery and control of 
broadband services. A USB port is available for other connectivity applications. 

Содержание GigaSpire BLAST u6me


































Отзывы: