Calix GigaSpire BLAST u12 Скачать руководство пользователя страница 35

Страница: 35 / 38

Proprietary Information: Not for use or disclosure except by written agreement with Calix.

LED States - Alexa

Alexa behaviors are detailed below.

Alexa LED States

Power-up

Status

Function

LED

Statu

Alexa has been

triggered, Alexa is

listening

Alexa is listening and active. Listing once the

trigger word is heard.

Note:

All four LED's on.

Note:

Cyan on continuously.

Alexa Thinking

Alexa is thinking waiting for a response from

AVS.

Note:

All four LED's on.

Note:

Toggles from Cyan to Blue every .62

seconds

Alexa Responding

Response received from AVS and voices the

response.

Note:

All four LED's on.

Note:

Toggles from Cyan to Blue every 1.26

seconds.

Ongoing Alexa

Activities

On-going Alexa actives such as playing music,

reading news, reading e-books.

Note:

All four LED's affected

Note:

GigaSpire LED status's return once Alexa

activities are complete.

Alexa Notifications

Alexa notifications have arrived. One .62 second

burst followed by an off cycle (same duration)

for each received notification.

Note:

All four LED's affected

Note:

Toggles for .62 seconds between yellow

and off.

Alexa Notifications

Queued

Alexa Notifications have arrived but have not be

requested by the user. Continuous slow pulse

until notifications are picked up. This state

continues unless a temporary interruption by a

regular Alexa listen/think/respond interaction is

requested.

Returns to GigaSpire LED status once all

notifications have been picked up.

Note:

All four LED's affected

Note:

Toggles for 1.26 seconds between yellow

and off.

Alexa Do Not

Disturb

Alexa DND has been provisioned (Enable DND,

Disable DND)

Note:

All four LED's affected

Note:

Toggles for 1.26 seconds

Содержание GigaSpire BLAST u12







































Результаты поиска

Содержание GigaSpire BLAST u12

Отзывы:

Похожие инструкции для GigaSpire BLAST u12

Бренды по названию

Популярные бренды

Calix GigaSpire BLAST u12, Руководство по установке

Результаты поиска

Содержание GigaSpire BLAST u12

Отзывы:

Похожие инструкции для GigaSpire BLAST u12

Бренды по названию

Популярные бренды