Calix E7-2 Скачать руководство пользователя

Страница: 115 / 225

115

Proprietary Information: Not for use or disclosure except by written agreement with Calix.



remove vlan <vlan-id> from-mvr-profile <p-name>



set mvr-profile <p-name> name <new-name>



set mvr-profile <p-name> vlan <vlan-id> [mcast-range-1|mcast-range-
2|mcast-range-3|mcast-range-4]



show mvr-profile [p-name]

Creating Multicast Address Map and Ranges

This topic describes how to create a multicast address map and IP address ranges that are

assigned to the map. The map is referenced by a multicast profile that is applied when adding

a service to an xDSL port. See

Creating a Multicast Profile

(on page

110

Configuration guidelines



The multicast address map is an optional parameter of the multicast profile.



With no multicast address map identified, multicast group destination addresses are

unconstrained.



Each multicast address map can contain up to eight distinct multicast IP address ranges,

not overlapping.



When both multicast white list and multicast address map are applied to a service, only

the white list ranges are passed on to the ONT or xDSL port. The multicast address map

is ignored.

Parameters

You can provision the following parameters for multicast maps and ranges:

Parameter

Description

Valid Options

Name*

Name of the multicast map.

32 character string

ID*

Index value designating the multicast range in the
multicast map. You can leave the value, or select another
(1-8).

1-8

Start IP Address*

First address in the multicast range.

Any multicast address, lower than the end
IP address (224.0.0.0 - 239.255.255.255)

End IP Address*

Last address in the multicast range.

Any multicast address, higher than the end
IP address (224.0.0.0 - 239.255.255.255)

*Required fields

To create a multicast address map and range

Access the profile page:



From CMS:



On the Navigation Tree, click

CMS



In the Work Area, click

Profile

E3-48C/E5-48/E7/ONT >

Profile

Service

Multicast

Multicast Maps

Содержание E7-2
































































































































































































































Результаты поиска

Содержание E7-2

Отзывы:

Похожие инструкции для E7-2

Бренды по названию

Популярные бренды

Calix E7-2, Инструкция по применению

Результаты поиска

Содержание E7-2

Отзывы:

Похожие инструкции для E7-2

Бренды по названию

Популярные бренды