Dip Switch Features
Gate Closing Delay
- switch to ON position, turn timer to 1- 6 seconds.
Figure C. Useful for dual gate operators with locks, requiring one gate to
close first before the other, also known as "Bipart Delay".
Auto-Close
- automatically closes the gate after a timed delay. Set to ON
and turn the blue TIMER knob anywhere from 1-60 seconds. Figure B.
Mid-Stop
- allows the remote control to stop the gate when opening or
closing. Press once to stop the gate, and press the remote again to
reverse the gate.
Dual Gate Installation
- for the secondary gate operator only, set the
#5 SLAVE switch to ON. If single gate installation, set to OFF.
Gate Open Direction
- set the direction of which the gate opens when
viewed from inside the property: Left or Right.
Figure B:
Timer
Figure C:
Delay
Figure A: DIP switches
Anti-Tailgating System
- when ON, after a vehicle has cleared the
safety loop, the gate will start to close immediately. If a second vehicle
crosses the loop while the gate is closing, the gate will stop. The second
vehicle must get off the loop before the gate closes completely.
23
Switch
Name
Description
1
2
3
4
5
6
CL-DELAY
Timer
OSC
1PASS
SLAVE
OPEN L/R
There are 6 dip switches located at the bottom of the circuit board, Figure A. Each switch controls a
different feature of the gate operator.