California Instruments P Series, Руководство по обучению, Страница: 30 / 35

PGUI / PGUI32 Training Manual
30 1.1
6.3 Voltage and Frequency Transient
The Voltage and Frequency transient is convenient if you want to change both parameters at the
same time.
Exercise: 1. Clear the transient list using the Clear button. Confirm this operation when
prompted.
2. Move to the first row (No 1) and select the ‘VF Step’ transient type.
3. Set the Time (s) field to 0.04 for a 40 msec time. Set the Voltage field to 0.0
V. Set the Frequency field to 50.00.
4. Move to the second row (No 2) and select the ‘VF Sweep’ transient type.
5. Set the Time (s) field to 3.000 for a 3 second sweep time. Set the Voltage field
to 120.0 V.. Set the Frequency field to 500.00.
6. Your Transient window should look like the window shown here at this time.
7. If you have a unit connected, you can run the transient program by clicking
on the Start button. If you are in simulation mode, the PGUI will wait for the
duration of the transient program (3.04 sec in this case) and stop.