S320 OCS Hardware User Guide
Doc. Part No. 460167-00
May 27, 2015
Rev. B7
Page 31 of 46
The proper method for unpacking the S320 OCS includes the following steps:
1.
Carefully inspect the exterior of each shipping container for any obvious signs of
damage that may have occurred during shipping.
2.
Cut the band straps wrapped around the container.
Including shipping containers and contents, the S320 OCS weighs approximately
61 lbs. This weight exceeds the OSHA-recommended, safe-lifting weight for one
person. Accordingly, CALIENT recommends
at least two persons
take part any time
the switch is lifted or moved. In addition, always make sure the switch is right-side
up and level when lifting or handling it.
3.
Remove and set aside the accessories box containing the cables (version 2 only),
mounting screws and ESD grounding strap.
4.
Carefully lift the chassis out of the inner container.
5.
Remove the anti-ESD bag from the chassis and keep it for future shipping needs.
6.
Compare the contents of the shipment against the packing list. If any items are missing,
contact CALIENT Service and Support immediately.
4.4
Contents Inventory
The shipment should include the following contents:
System Hardware:
The CALIENT S320 OCS chassis.
Cables (version 2 only):
USB-to-DB9 serial cable (1), RJ45-to-DB9 cable and adapter (1),
Ethernet cables (2).
Documentation and Software:
A one-page (front and back)
S320/160 Optical Circuit
Switch Quick Start Guide
.
Comprehensive user documentation for the S320 OCS—including a
Hardware User
Guide
,
Getting Started Guide, TL1 Reference Guide, Troubleshooting and Alarm
Reference Guide
and
Release Notes
Miscellaneous:
Type 12-24 rack-mounting screws (12).
