background image

 

S320 OCS Hardware User Guide 

Doc. Part No. 460167-00 

May 27, 2015 

Rev. B7 

 

 

Page 2 of 46 

© 2015 CALIENT Technologies, Inc. All rights reserved. 

CALIENT, CALIENT Technologies, the CALIENT design logo, and the tag line “Move the light,  
not  the fiber” are registered trademarks of CALIENT Technologies, Inc. in the U.S. and other 
countries. All other marks belong to their respective owners. 

Confidential and Proprietary Information 

This document contains confidential and proprietary information of CALIENT Technologies, 
which is protected by the copyright laws of the United States, international copyright treaties, 
and all other applicable national laws. Any unauthorized use, reproduction, or transfer of  
any  information in this document is strictly prohibited. This document contains information 
regarding technology that is protected under one or more pending or issued United States  
and  foreign patents. This manual may not be copied wholly or in part without prior written 
permission from CALIENT Technologies. To obtain such permission, please contact: 

CALIENT Technologies 
25 Castilian Drive 
Goleta, CA 93117 USA 
Phone: +1.805.562.5500 

www.calient.net

 

Service and Support 

CALIENT offers a wide range of product support programs including installation support, repair 
services, maintenance services and technical training. 

If you need technical assistance with CALIENT’s products, please visit our automated customer 
support portal at http://support.calient.net or email [email protected]

If you are experiencing a service-affecting emergency, please contact us on the following 
numbers: 

Within US: 

1.877.682.1160 

International:  International Call  Country Code + 1.877.682.1160 

If your call is not answered immediately, please leave a message. Messages are retrieved 
continuously. 

Document Part Number: 460167-00, Rev. B7 

Содержание S320















































Отзывы: