Page 4
is on, the previous PTY program and PTY word is displayed on LCD. If there
are no keys entered for 2 seconds, previously selected PTY is searched. During
1 loop, if desired PTY is not found, NO PTY is flashed, then return to previous
normal radio and PTY word disappear.
13. TA [TRAFFIC ANNOUNCEMENT] BUTTON
When press the button, it is activated as TA mode on or off.
When TA mode is on(TA is displayed on LCD), it will begin to seek TA station
and TA SEEK will be displayed on LCD for a while.
When traffic announcement is transmitted:
1). If the unit is in MMC/SD, USB mode, it will switch to radio mode temporarily.
2). If volume level is below 20, volume level is raised to 20, and returns to its
previous mode and volume level when the traffic announcement is over.
If volume is adjusted during traffic announcement, only the traffic
announcement volume is valid.
* TA interruption function:
The current traffic announcement is cancelled by pressing this key. But the
TA mode will not be off.
* When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or
saved only when traffic program identification code has been received.
When TA is ON, traffic program identification code is not received during
specified time.
14.AF [ALTERNATIVE FREQUENCIES] BUTTON
When pressed briefly , AF switching mode is selected and the state of AF
switching mode is displayed by AF segment in display.
Segment off: AF switching mode off.
Segment on: AF switching mode on, and has RDS information.
Segment flashing: AF switching mode on, but RDS information is not
received yet.
When AF switching mode is selected, the radio checks the signal strength of
AF all the time. The interval of checking time of each AFs depends on the signal
strength of current station, from a few minute for strong station to a few
seconds for weak station.
Every time that new AF is stronger than current station, it switches over to
that frequency for very short time, and NEW FREQUENCY is displayed for
1-2 second. Because the mute time of AF switching or checking time is very
short, it is almost inaudible in case of normal program.
During FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY function can
only receive and save RDS program.
15. AS/PS BUTTON (Auto-storage /Preset scan)
During radio mode:
1) When press and hold for more than 1 second, the radio searches from the
current frequency and checks the signal strength level until 6 station are
found. And then the 6 stations frequency are preset to the corresponding
preset memory numbered bank. The auto-storage operation is implemented
in the each selected band. When the auto-storage operation is finished, the
radio execute the Preset scan.
Page 7
Содержание mcd068
Страница 1: ......
