Page 3
Page 8
5. POWER ON/OFF & MUTE
When the unit is power off, the unit comes to on by pressing any button except
the EJECT and the RELEASE button.
When the unit is power on, press and hold the power button for more than
0.5 seconds, the unit goes into power off mode.
When the unit is power on, press the power to switch the MUTE state on/off.
6. LCD Display
7&8. TUNE, SEEK, TRACK, SKIP UP / DOWN BUTTONS
a) During RADIO mode:
Press the >>| or |<< button briefly to manual tune up/down for the desired
radio station frequency step by step.
Press and hold the >>| or |<< button for longer 0.5 seconds, to automatically
tune up/down for the radio station frequency of strong signal.
b) During SD/MMC & USB mode:
Press the >>| button briefly to play next track.
Press the |<< button briefly to play the current track from the beginning of it
if the playing time is more than 2 seconds.
Press the |<< button briefly to play the previous track if the playing time is
less than 2 seconds.
9. BAND BUTTON
During radio mode, press the BND button briefly to select the radio
broadcasting band you would like to hear. The AM/FM band is toggled
cyclically through the tuning bands: ->FM 1-> FM 2 -> FM 3 -> MW 1->MW 2 ->.
In MMC/SD, USB mode, if you press BAND button repeatedly, the file name,
folder name, song
’
s title, artist and album information will be scrolling on the
LCD display.
As long as the current playing MP3/WMA music contains relevant ID3 tag
information in version 1.0/2.0 format, the 3 items underlined above will be
scrolling on the LCD
display; otherwise, they will not.
10. MODE BUTTON
Press it to select RADIO, CARD(after inserting MMC/SD card), USB(after
inserting USB stick) and AUX mode.
11. CLOCK BUTTON
Press the CLK button briefly to display time for 5 seconds on the display, and
then returns to its previous display unless the button is pressed again.
Then press the CLK button and hold for more than 1 seconds until the real
time flashes on the display. Then you can adjust HOUR or MINUTE by press
the VOL- or VOL+ button .
12. PTY (PROGRAM TYPE) BUTTON
Press it briefly and repeatedly to select one of the following mode:
POP M- - NEWS
While selecting PTY TYPE, its selection is implemented by preset buttons as
described in preset key. (press one of the 6 preset buttons shortly and
repeatedly to select the PTY TYPE in the preset button) When POP M or NEWS
TROUBLE SHOOTING
Before using the check list please make all the connections first.
If you still have questions after going through the checklist, please consult
your local customer service representative.
Common Symptoms
There is no power.
Cause
The fuse has blown.
The volume control is set too low.
There is no sound.
The operation keys
do not work
The antenna cable is not
connected.
Insert the antenna cable firmly into the
antenna socket of the device.
No radio reception.
The built-in microcomputer is not
operating properly due to noise
Switch the device off and on again. Or
press the RESET button to resume the
program.
The device has not been correctly
connected.
Turn up the volume properly.
Check the power and earth connection
according to the wiring diagram.
Replace another fuse according to the
wiring diagram.
The car ignition is switched off.
If the power supply is properly connected
to the car accessory, switch the ignition
key to ON
or " ACC
"
"
" .
Solution
In automatic search
mode the radio does
not stop at a trans-
mitting station.
Tune in to a radio station manually.
The transmission signals are
too weak.
Содержание mcd068
Страница 1: ......
