Having chosen the box location, proceed as in points 1-2-3-4 below.
Installation and Insulation
Assembly Procedures -
Model 2 + 0 and 2 + 1
Examples of location
in manifold box
Service Instructions
There is no service required for the HydroLink™ device.
Caleffi North America, Inc.
3883 West Milwaukee Road
Milwaukee, WI 53208
T: 414.238.2360 F: 414.238.2366
7-23-18
·
Installation Tip
Scan to view
5599 HydroLink™
4
Leave this manual for the user.
2.
Mount the device to
the internal supports
in the manifold box.
3.
Connect the piping, leak-
test and close the pre-formed
insulation shell after removing
the protection film from the
upper surface adhesive.
4.
If the unit is to be used
with chilled water, see point
2 of the previous section.
1.
Remove the protection film
from the lower surface adhesive
and position the HydroLink™
unit inside the insulation shell.
