Operating Instructions
Uniprep 7 Rotary Scraping Tool
1
4
09. Certificate of Conformity
T
his product has no specific calibration period, however p
eriodic
safety inspections should be carried out by the operator as specified in
this manual, if in any doubt please contact the manufacturer for further
information.
Service and Repair
For service and repair please contact:
INTERNATIONAL
AUSTRALIA / NZ
Caldervale Technology Ltd
Caldertech Australia Pty Ltd
Bretfield Court, Dewsbury,
Unit 3/30 Juna Drive,
West Yorkshire WF12 9BG, UK
Malaga WA 6090, Australia
T.
+44 (0)1924 469571
T.
+61 (0)8 9209 1132
E.
E.
W.
caldertech.com
W.
caldertech.com.au
Decommissioning and Disposal
These give the instructions for decommissioning and disposal of the
equipment and confirm how it is to be taken out of service safely, in
respect of the Essential Environmental, Health and Safety Requirements.
• If a Caldertech pipe preparation tool has reached the end of its
useful working life and cannot be refurbished it must be sent to a
licensed recycling facility for treatment. That will ensure the waste
hierarchy requirements are met.
• End of life treatment is the responsibility of the Customer. This can
also be achieved by returning the product back to the manufacturer
if required.
10.
11.
