Page 40
Service Information
DOOR PANEL REMOVAL
*
1
Locate the two buttons
below the front panel
on the same side as the
Main Control Panel
*
2
*
3
Pull bottom away from spa, lower
slightly and remove from spa. Place
door panel in cool shaded place.
Button
Button
Push up and hold one of
the buttons using an Allen
wrench less than ¼" (6 mm)
in width or small screwdriver
into the center of the safety
lock then pull the door panel
away from the spa next to
that button location. Repeat
procedure on second button.
Main Control Panel
Safety Lock
DOOR PANEL REPLACEMENT
*
1
Raise door panel placing top
under Stainless border with bottom
slightly away from spa.
Push door panel against spa allowing it
to rest above the wood frame. Repeat on
other side of door panel
*
2
*
3
Push bottom of door panel all the
way in making it even with existing
panels.
If necessary, slide door panel from
side to side making the spacing
even on both sides of the door.
Safety Lock
The illustrations are to be used as a reference
only (your spa may look different).
