Spa Care and Maintenance
Page 28
3. As part of this process, superchlorinate the spa water by adding
three teaspoons of chlorine (sodium dichlor) per 250 gallons of spa
water into the filter compartment. This is twice the normal amount
of chlorine needed for superclorination. This extra amount of
chlorine is needed to destroy the anti-freeze.
NOTE:
A defoamer may be needed to decrease the amount of
foam caused by the anti-freeze.
4. Drain your spa to ensure removal of anti-freeze. Do not drain water
on grass or plants due to excessive chlorine level.
5. After the spa has completely drained, re-install your filter and
follow the Start-up Procedures in the Getting Started section of the
Owner’s Manual.
IMPORTANT:
Always keep spa covered when not in use, whether it
is empty or full.
CARE OF THE SPA PILLOWS
The spa pillows will provide years of comfort if treated with care. They
have been positioned above the water level to minimize the bleaching
effects of chlorinated water and other spa water chemicals. To extend
their life, whenever the spa shell is being cleaned, the spa pillows should
be removed and cleaned. Body oils can be removed with a mild soap
and water solution. ALWAYS rinse off the spa pillows thoroughly to
remove any soap residue. If the spa is not going to be used for a long
period of time (that is during a vacation or if the spa is winterized), or
when the spa water is being super-chlorinated, the spa pillows should be
removed until the next use of the spa.
TO REMOVE AND REPLACE THE SPA
PILLOWS:
1. Carefully lift one end of the pillow away from the spa shell.
2. Continue lifting one end until all pillow retainers are released from the
pillow.
IMPORTANT
: Just pulling the pillow straight up and out of the shell
recess will eventually damage the pillow. This abuse is not covered
under warranty.
3. To reinstall the spa pillow, carefully bend the pillow slightly to allow
one of the pillow retainers to slip into the recess in the back of the
pillow.
4. Keeping the pillow slightly bent, slide the other pillow retainer into the
recess in the back of the pillow.
5. After all the pillow retainers are in place, press the pillow down into
the recess in the spa shell.
CARE OF THE EXTERIOR
SPA SHELL
Your
CALDERA
spa has an acrylic shell. Stains and dirt generally will not
adhere to your spa’s surface. A soft rag or a nylon scrubber should easily
remove most dirt. Most household chemicals are harmful to your spa’s
shell (see below for detailed information on cleaning agents). Always
rinse off any spa shell cleaning agent with fresh water.
IMPORTANT:
1. The following products are the ONLY approved cleaning agents
for your
CALDERA
spa shell: plain water,
CALDERA
Spa Shine,
Brillianize
®
or Soft Scrub
®
. The use of alcohol or any other
household cleaner other than those listed to clean the spa shell
surface is NOT recommended. DO NOT use any cleaning products
containing abrasives or solvents since they may damage the shell
surface, specifically: Simple Green
®
, Windex
®
or Spa Mitt. NEVER
USE HARSH CHEMICALS! Damage to the shell by use of harsh
chemicals is not covered under the warranty. Always rinse off any
spa shell cleaning agent with fresh water.
2. Iron and copper in the water can stain the spa shell if allowed to go
unchecked. Ask your
CALDERA
dealer about a Stain and Scale
Inhibitor to use if your spa has a high concentration of dissolved
minerals. (
WATKINS WELLNESS
recommends Stain & Scale
Defense.)
3. Keep all cleaners out of the reach of children and use care when
applying.
AVANTE
™
SPA CABINET
All Utopia spas use the exclusive all-climate
AVANTE
Cabinet designed
for years of performance. The unique, ribbed pattern design is enhanced
by the rich cabinet colors that give the appearance of high-end furniture,
without looking like real wood and, because of the durability of the spa
cabinet material, it comes with a five year warranty against cracking, or
rotting.
CARE OF THE SPA COVER
WARNING:
The cover is a manual safety cover that meets or
exceeds all prevailing requirements of ASTM Standards for spa safety
covers when installed and used correctly as of the date of manufacture.
Non-secured or improperly secured covers are a hazard. Open the cover
to its fully open position before use.
VINYL COVER
The vinyl spa cover is an attractive, durable foam insulation product.
Monthly cleaning and conditioning are recommended to maintain its
beauty.
TO CLEAN AND CONDITION THE VINYL
COVER:
SERVICE NOTE:
To remove tree sap, use cigarette lighter fluid (not
charcoal lighter fluid). Use sparingly, and rinse with a saddle soap solution
immediately afterwards, then wipe dry.
IMPORTANT REMINDERS:
• DO
remove snow buildup to avoid breakage of the foam core from
the additional weight of the snow.
• DO
lock cover lock straps to secure the cover when the spa is not
in use.
• DO NOT
drag or lift the spa cover using either the flaps or the cover
lock straps.
• DO NOT
walk, stand, or sit on the cover.
• DO NOT
place any metal or heat transferring object on the cover
or place any type of plastic tarp or drop cloth over the cover as
this may result in a melted foam core, which would not be covered
under the warranty.
• DO NOT
use any lifting mechanisms, chemicals or cleaners except
those recommended by
WATKINS WELLNESS
or its Authorized
Sales and Service Dealer.
• It’s important to have clean water. Water maintenance is one of
the least understood, yet most important areas of spa ownership.
Your dealer can guide you through the process of achieving and
maintaining perfect water in your spa, given your local conditions.
Your program will depend on your water’s mineral content, how
often you use your spa, and how many people use it.
Spa Care and Maintenance
