Page 15
Operating Instructions
TEMPERATURE CONTROL
Press the actual temperature on Home screen to
display Set Temperature screen.
The set temperature range is from
26°C to 40°C (80°F to 104°F).
NOTE
: The water temperature
may vary depending on the current
use and condition of your spa and
outside temperatures.
The factory set temperature of the spa water is 38°C (100°F).
The last temperature value set by the user will be stored in memory. If
power is disconnected from the spa, it will automatically revert to the last set
temperature when power is reapplied.
Press to raise set temperature of spa. Press and hold to
raise the temperature continuously.
Press to lower set temperature of spa. Press and hold to
lower the temperature continuously.
MEMORY SCREEN
Press
38.0
c
on Home screen to display Memory screen.
Press to activate the last saved set of
operating functions.
Press to save the current set of operating
functions (jets and lights only).
Press to return to home screen if neither
of the above buttons are used. Screen
will automatically revert back after 10
seconds of non activity.
CLEAN CYCLE SCREEN
Press
38.0
c
on Home screen to display Clean Cycle screen.
AUTO
CLEAN CYCLE:
START
ON
OFF
Press to start the
manual Clean Cycle.The screen
will briefly display CLEAN
CYCLE: ACTIVE. Activates jet
pump 1 on high speed for a ten
minute period.
AUTO
CLEAN CYCLE:
START
ON
OFF
Press & hold to activate and deactivate the Auto
Clean Cycle. If activated, a clean cycle will run every
24 hours starting at the time ON was first pressed
(runs Jet 2 for 1 minute and Jet 1 for 9 minutes)
Press to return to Home screen. Screen will
automatically revert back after 10 seconds of non
activity.
SETTINGS SCREENS
Press
38.0
c
on Home screen to display first Settings Screen.
The first Settings screen allows you
to turn Temperature Lock, Spa Lock,
Lights Timer and Summer Timer On
or Off.
TEMPERATURE LOCK
Press
38.0
c
on Home screen to display Temperature Lock.
The Temperature Lock feature
prevents changing the desired
water temperature setting. All other
control panel functions will operate
normally while the Temperature
Lock is "ON".
SETTINGS
TEMPERATURE LOCK
OFF
ON
SPA LOCK
OFF
ON
LIGHTS TIMER
OFF
ON
SUMMER TIMER
OFF
ON
Press and hold ON or OFF for
approximately 4 seconds
to activate
or deactivate.
SPA LOCK
Press
38.0
c
on Home screen to display Spa Lock.
When activated, the Spa Lock
feature disables all functions on the
control panel.
The control panel will not respond to
anything except
38.0
c
on the Home
screen.
SETTINGS
TEMPERATURE LOCK
OFF
ON
SPA LOCK
OFF
ON
LIGHTS TIMER
OFF
ON
SUMMER TIMER
OFF
ON
Press and hold ON or OFF for
approximately 4 seconds
to activate
or deactivate.
LIGHTS TIMER
Press
38.0
c
on Home screen to display Lights Timer.
When activated, the exterior lights
of the spa will come on 5 seconds
later will remain lit for 6 hours and
repeat the cycle every 24 hours
from activation time.
SETTINGS
TEMPERATURE LOCK
OFF
ON
SPA LOCK
OFF
ON
LIGHTS TIMER
OFF
ON
SUMMER TIMER
OFF
ON
Press ON or OFF to activate or deactivate.
SUMMER TIMER
Press
38.0
c
on Home screen to display Summer Timer.
• The Summer Timer can be
activated during extremely hot
summer months to help maintain
set water temperatures.
• Activating the Summer Timer
causes the heater to immediately
shut down. The circulation pump will remain on for approximately 5
minutes pushing water through the heater to cool it down.
SET TEMPERATURE
c
38.0
38.0
c
MEMORY:
RESTORE
SAVE
SETTINGS
TEMPERATURE LOCK
OFF
ON
SPA LOCK
OFF
ON
LIGHTS TIMER
OFF
ON
SUMMER TIMER
OFF
ON
SETTINGS
TEMPERATURE LOCK
OFF
ON
SPA LOCK
OFF
ON
LIGHTS TIMER
OFF
ON
SUMMER TIMER
OFF
ON
SETTINGS
TEMPERATURE LOCK
OFF
ON
SPA LOCK
OFF
ON
LIGHTS TIMER
OFF
ON
SUMMER TIMER
OFF
ON
SETTINGS
TEMPERATURE LOCK
OFF
ON
SPA LOCK
OFF
ON
LIGHTS TIMER
OFF
ON
SUMMER TIMER
OFF
ON
SETTINGS
TEMPERATURE LOCK
OFF
ON
SPA LOCK
OFF
ON
LIGHTS TIMER
OFF
ON
SUMMER TIMER
OFF
ON
