56 —
e
lectri
c
alc
®
P
ro
aPPenDIX b – preFereNce SettiNGS
The
ElectriCalc Pro
has Preference Settings that allow you to set
calculator modes. If you replace your batteries or perform a Full
Reset* (press
, hold down
, and press
), your calculator
will return to the following settings (in addition to those listed on the
previous page), with the default setting for each preference listed
first:
* Depressing the Reset button located above the
key will also
perform a Full Reset.
PRefeRenCe
oPTIons
1) NEC Code
– 2011:
Sets the calculator to 2011 NEC
Code Year
– 2008:
Sets the calculator to 2008 NEC
Code Year
– 2005:
Sets the calculator to 2005 NEC
Code Year
– 2002:
Sets the calculator to 2002 NEC
Code Year
– 1999:
Sets the calculator to 1999 NEC
Code Year
– 1996:
Sets the calculator to 1996 NEC
Code Year
2) Ambient
Temperature
Units
– °C:
Ambient Temperature is stored and
displayed as °C.
– °f:
Ambient Temperature is stored and
displayed as °F.
3) Length Units
– feeT:
Length values stored or calculated
using the
key are displayed as Feet.
– MeTeRs:
Length values stored or calculated
using the
key are displayed as
Meters.
