4 — ElectriCalc Pro
Installing NEC Updates
Your
ElectriCalc Pro is now updateable
for future National Electrical Code
®
editions that are updated every three
(3) years (next Code update is 2005).
To upgrade your unit, follow the instruc-
tions below:
1) Purchase the NEC Update from CI
(see pricing & details from CI’s Web
site: www.calculated.com or call 1-
800-854-8075). This Update is in the
form of a chip that contains the new
Code.
2) Once you receive the NEC Update
chip, you need to install it in your
ElectriCalc Pro:
a) Turn calculator off.
b) As a precaution, remove the bat-
tery (located back of calculator, top
of unit) by sliding battery door out
with your thumbnail. Set aside.
c) Using a screwdriver, pop out the
square tab located in the middle
section on the back of your calcu-
lator.
d) Replace it with the new Update tab
by inserting it into the slot.
e) Replace the battery door.
f) Turn calculator on. Your calculator
is now updated and ready to use.
5060-UG-B-Composite 4/4/03 12:37 PM Page 6
