6
Version: 1.1
©2019 CalAmp All rights reserved. 1301 W. George Bush Hwy, Suite 300, Richardson, TX 75080, 214-612-7000
6. Regulatory Information
Human Exposure Compliance Statement
Pursuant to 47 CFR § 24.52 of the FCC Rules and Regulations, personal
communications services (PCS) equipment is subject to the radio frequency radiation
exposure requirements specified in § 1.1307(b), § 2.1091 and § 2.1093, as appropriate.
CalAmp SCI certifies that it has determined that the SC120
5
V complies with the RF
hazard requirements applicable to the broadband PCS equipment operating under the
authority of 47 CFR Part 24, Subpart E of the FCC Rules and Regulations. This
determination is dependent upon installation, operation and use of the equipment in
accordance with all instructions provided.
The SC120
5
V is designed for and intended to be used in fixed and mobile applications.
“Fixed” means that the device is physically secured at one locatio
n and is not able to be
easily moved to another location. “Mobile” means that the device is designed to be used
in other than fixed locations and generally in such a way that a separation distance of at
least 20 cm is normally maintained between the trans
mitter’s antenna and the body of the
user or nearby persons. The SC120
5
V is not designed for or intended for use in
applications within 20 cm of the body of the user and such uses are strictly prohibited.
To ensure that the SC120
5
V complies with current FCC regulations limiting both
maximum RF output power and human exposure to radio frequency radiation, a
separation distance of at least 20 cm must be maintained between the unit’s antenna and
the body of the user and any nearby persons at all times and in all applications and uses.
FCC Rules and Industry Canada (IC) regulatory information
Compliance Statement (Part 15.19)
The equipment device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received including interference that may cause
undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly approved could void the user’s authority to
operate the equipment. Manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment.
Compliance Statement (Part 15.105(b))
