ITC 220 Base Station, Locomotive & Wayside Radio Transceiver Field Service Guide PN 0046300120 Rev. A
| Page 50
where:
TRACE
is the trace command
level
is a number from
0
to
7
feature
is the name of the feature you want to trace
destination
is the location of the trace output, which can be port, file, or both. If you do not enter a
destination, the trace output is sent to the port only.
7.
Click
OK
.
To suspend a trace:
1.
In
XtermW
, click
Send
, Click
Command
, and then type:
TRACE,SUSPEND
2.
Click
OK
.
To resume a trace:
1.
In
XtermW
, click
Send
, click
Command
, and then type:
TRACE,RESUME
2.
Click
OK
.
To stop a trace:
1.
In
XtermW
, click
Send
, click
Command
, and then type:
TRACE,OFF
2.
Click
OK
.
5.10
MANAGING SOFTWARE APPLICATION IMAGES
From time to time, new functionality becomes available from the transceiver manufacturer in the form of a new
software application image, or briefly, image. This new functionality is provided t to the transceiver by updating the
transceiver software.
All image management operations may be accomplished using operator commands. However, the transceivers also
support the capability to perform some image management operations using ITC Systems Management (ITCSM)
features via a network connection from an application gateway.
Using ITCSM features involves creating a radio software kit, as well as sending the appropriate messages to the radio in
order to perform the management operations. Consult with your back office support team or engineers for more
information about ITCSM support of your transceiver.
This section explains how to:
Obtain software image status information
Update transceiver software application images
Perform a manual software rollback
Determine if automatic roll back has occurred