Cal Spas 1100 Electronic Series, Руководство пользователя

Страница: 84 / 328

16
1500 Electronic Operation
(Continued)
Setting Filtration Cycles
Your spa will automatically filter itself twice a day. Set to the filtration time, turn off the power to the spa and turn it back on at the time
of day you would like the filtration cycles to start at the GFCI Breaker.
Example: If you power-up your spa at 12 Noon, your filtration cycles will start at 12 noon and 12 Midnight.
The first cycle will start after the spa is powered up. The second filtration cycle will begin twelve hours later. The filter cycle duration is
preset for 2 hours. If spa usage is heavy, your Cal Spas authorized service technician can reconfigure your system to run two five hour fil-
ter cycle.
120/240 Conversion
The 1500 series spa is a convertible system. The conversion from 120 Volts to 240 Volts must be performed by a licensed/bonded
electrician. See 120 to 240 volt conversion instructions, located on the inside cover of the control box.
Note: Only spas equipped with 1.5 BHP pumps may be converted to 120 Volt. Spas with 2.0BHP pumps or larger can only be operated on
240 volt services.
120 Volt Heater Operation
When connected as a 120-Volt spa, the heater will only operate when the spa motor is on low speed or filtration speed. Once the
high-speed motor is engaged, the heater will automatically disengage.
240 Volt Heater Operation
When connected as a 240-Volt spa, the spa heater will operate on either low-speed or high-speed. The heater will operate until the set tem-
perature is reached.