Cal-Royal CRCODE-203, Инструкция и руководство по программированию

Страница: 7 / 16

To Change Handing
OUTSIDE LOCK
(Lever shipped Right Handed)
1. Insert key and turn 90° clockwise.
2. Insert pin for lever latch on the bottom of the lever.
3. Pull lever off.
4. Install lever to the desired handing of the door.
5. Turn key 90° clockwise and push lever until it
clicks.
6. Pull out key.
make sure this is
set horizontally
INSIDE LOCK
1. Insert key and turn 90° clockwise.
2. Insert pin for lever latch on the bottom of the lever.
3. Pull lever off.
4. Install lever to the desired handing of the door.
5. Turn key 90° clockwise and push lever until it
clicks.
6. Pull out key.
Check Spindle Timing:
Using a screwdriver, turn the
spindle timing guide towards
the direction of the tip of the
lever until it stops.
LH / LHR
RH / RHR RH / RHR
LH / LHR
pin for lever latch
5 6605 Flotilla St., Commerce, CA 90040
Tel (323) 888-6601 Fax (323) 888-6699
www.cal-royal.com