Cal Flame Chef C100, Руководство пользователя

Страница: 18 / 32

Air Shutter Adjustment
(continued)
4. Notice the flame characteristics. If the flame is yel-
low, indicating insufficient air, turn the air shutter
counter clockwise to allow more air to the burner.
5. If the flame is noisy and tends to lift away from the
burner, indicating too much air, turn the air shutter
clockwise.
6. Repeat procedure for each burner requiring adjust-
ment. Be sure to tighten air shutter screws when fin-
ished.
7. Once adjusted, turn the burner OFF and reverse
steps to reassemble.
Low Setting Adjustment
Grill and Open Burners
The valves on your new grill feature an adjustable low
setting. Due to fluctuations in gas pressure, heating
value or gas conversion, you may feel it necessary to
increase or decrease gas flow in the low position.
1. Begin by lighting the burner.
2. Turn the control knob to the lowest setting, all the
way counter clockwise. The arrow will stop between
MED and LOW.
3. Remove knob.
4. Hold the valve shaft with a pair of pliers and insert
a thin, flat tipped screwdriver into the shaft. While
viewing the burner, adjust to a minimum stable flame.
5. WARNING! Look for stability in the low flame set-
ting. A too small burner flame may go out or be extin-
guished easily. Unburned gas can then escape creat-
ing a hazardous condition.
NOTE: It is normal to hear a popping sound when the
burners are first turned OFF.
“Insert Cad
drawing
showing bezel
and valve stem
adjustment”