MN220-1 B 43
Portable Oxygen Concentrator
1.
The air intake / gross particle filter can be found on the lower front of the unit, as seen in
the figure below.
Figure 8: Air Intake and Gross Particle Filter
2.
Power down the unit
3.
Pull the filter cover off the front of the unit and remove the filter. Wash filter in a warm
water and soap solution
4.
Rinse the filter thoroughly, and remove excess water with a soft, absorbent towel. Ensure
that the filter is dry before replacing it.
5.
Replace the dry filter into the filter cover.
6.
Place the filter cover back into the housing and gently push into place.
CLEANING THE CABINET AND POWER SUPPLIES
Turn OFF the unit and disconnect the power cord from the electrical
outlet before you clean the unit to prevent accidental electrical shock
and burn hazard.
Remove the battery from the unit before performing any maintenance to
prevent accidental electrical shock and burn hazard.
Gross
Particle
Filter
Air
Intake/Filter
Cover
