CAI Networks WebMux 480S Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 83

CAI Networks WebMux 480S Скачать руководство пользователя страница 6

The WebMux™ Model 480S, 580SG, and 680PG User Guide – Version 7.0.x

Copyright© 1997-2006 CAI Networks, Inc.

2

Rear View

Server LAN Port

Connect this port to the Server LAN switch or hub. This port connects to the
servers and your local computers. It is the right most RJ45 socket. In Out-of Path
configuration, this is the only Ethernet cable to be connected.

Backup WebMux™ Port

Optionally, you may connect another WebMux™ to this port so that you can have
redundancy. If you have more than one WebMux™, you can connect them using
a cross over cable, or a regular cable with a hub.

Router LAN Port

Connect this port to the Router LAN switch or hub. In most situations, this port
connects to the Internet side network in NAT mode. It is the left most RJ45
Socket.

PLEASE NOTE:

The Router LAN and Server LAN port are not interchangeable.

External Modem Connect Port

To utilize the phone pager function of the WebMux™, please connect the
external modem to this port. In some cases, if you prefer support engineers to
not use diagnostic ports over the Internet, our support engineers can also
connect through the modem to assist you with setup issues. A US Robotics
V.Everything modem is required: US Robotics part number 3CP3453. Modem dip
switch has 3, 8, and 10 down, rest up. A standard external modem cable is also
needed. Check with your modem supplier for the cable.

Power Switch

This switches the WebMux™ on and off. When in the "off" position, the front
panel power switch is disabled.

Power Cord

Please use the supplied power cord to connect the WebMux™ to the power
source. 1U WebMux™ has a 115V/230V AC universal power supply.

«
...
4
5
6
7
8
...
»

Содержание WebMux 480S




















































































Отзывы:

Нет отзывов