CAI Networks WebMux 480S Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 83

CAI Networks WebMux 480S Скачать руководство пользователя страница 21

The WebMux™ Model 480S, 580SG, and 680PG User Guide – Version 7.0.x

Copyright© 1997-2006 CAI Networks, Inc.

17

•

Power up all devices in the network.

•

Verify that all the devices are up and running.

•

You are now ready to configure WebMux™.

Hardware Setup ---Configuration Summary

CAUTION:

Do not

proceed without collecting all necessary information.

•

Turn on the WebMux™. Turn on the switch on the back of the WebMux™
and push the power-on button in the front momentarily. You will see the
version number like this:

•

After self-test, hold down the Check-Mark button on the WebMux™ until
the LCD displays the first question – “

Enter WebMux™ host name

”.

•

During the initial configuration, you will be asked to provide names and IP
addresses. (See next section.) Each item is explained in the order it is
asked.

•

Answer the questions. Reboot.

Note:

When reboot is complete, the

service statistics screen will appear.

•

Run the Management Browser.

Initial Configuration

Enter WebMux™ Host Name

:

Enter the host name of the WebMux™. Use the right arrow to move the position,
the up and down arrows to select characters, left arrow to move back in position,
check mark button to confirm the change. This host name is for identification
purposes. You may call it webmux1, webmux2, etc. (Trick to enter name

«
...
19
20
21
22
23
...
»

Содержание WebMux 480S




















































































Отзывы:

Нет отзывов