The WebMux™ Model 480S, 580SG, and 680PG User Guide – Version 7.0.x
Copyright© 1997-2006 CAI Networks, Inc.
22
allowed host list is empty so that any IP address can access WebMux™. We do
encourage adding only host IP addresses that you do allow to manage
WebMux™ into the list. See configuration through browser interface for more
details.
Remake /home/WebMux/conf/passwd?
This function is provided in case you have forgotten the passwords to access the
Management Console
. Please use a browser to access Management Console
for normal password changes. The factory default password is the same as the
login ID on the screen. Answer Y to reset the Passwords to factory default.
Answer N to leave them unchanged.
Enter Admin http Port Number:
This is the http port number for accessing Management Console in non-secure
mode. Any unused port number can be used. Factory default port number is 24,
one could choose to use any unused port below 10214 or port number above
1024 for this. Using port number above 1024 will need to setup an admin farm.
This farm is for preventing port collision in case passive FTP is one of the farms.
Using port number below 1024 will not need to setup this farm.
Enter Admin https Port Number:
This is the https port number for accessing Management Console in secure
mode. Factory default port number is 35, one could choose to use any unused
port below 1024 or port number above 1024 for this. Using port number above
1024 will need to setup an admin farm. That is for preventing port collision in
case passive FTP is one of your server farms. Using port number below 1024
will not need to have this farm.
Discard Changes Made?
User can select Yes at this point, all the changes made will be discarded. By
default the answer is NO, all the changes will be saved to internal solid state
storage. Changes will take effect after next reboot.