Caffitaly System S23, Инструкция по эксплуатации

Страница: 21 / 36

21
CLEANING - MILK SYSTEM RINSE CYCLE
Ensure the Water
Tank is topped up
with water.
Place a large empty
container (at least
500ml) under the
Dispensing Spout.
Press the Cleaning
button. The button
will continue to
blink while cleaning
(approx. 50 sec.).
The
Milk System
Rinse Cycle will stop
automatically.
2.
After dispensing any milk based drinks, you must complete a
Milk System Rinse Cycle
.
If you have finished using the Milk Jug, ensure you perform the Milk System Rinse Cycle
and have cleaned the Milk Jug Dispenser (instructions below).
Full cleaning of the Milk Jug Dispenser must be completed at the end of each day.
It is recommended to perform a complete clean of the Milk Jug and components
at least
twice a week or more
. Refer to instructions on the following page.
NOTE: If there is still milk remaining in the Milk Jug , you can still perform the Milk
System Rinse Cycle function without removing the milk. The
Milk Jug
(with milk) can
remain on your machine.
Your machine won’t perform this function without the
Milk Jug in position.
Ensure you refrigerate the Milk Jug once this cycle has finished.
If the Cleaning Button is pressed for
2 seconds or longer, the machine will
automatically move into the
Descaling
Cycle. To cease this function press the
cleaning button again quickly. The button
lights will flash while the machine warms
up.
1.