8
English
Frothing and heating milk
•
Place the appliance on a fl at surface.
•
Remove the lid and place the mixer/milk frother insert inside the container.
•
Fill the container with the recommended amount of milk and refi t the lid.
Note
: For better frothing, use milk at refrigerator temperature (approx. 4°-8°C)
Note
: To prevent milk overfl owing after being frothed, the recommended maximum amount
of milk must be between the two lines marked MIN - MAX FROTH; this is because frothed
milk doubles or triples its initial volume.
•
Place the container on the base, then connect the plug to a power socket.
•
Press the switch once: the indicator light comes on
steady
RED
. The appliance will
start. The milk frother insert stops when the temperature of the milk has reached the set
value. The indicator light goes off.
Note
: The cycle can be stopped beforehand by pressing the switch once.
•
Pour the heated and frothed milk when the appliance has stopped.
•
Always switch the appliance off and disconnect it from the power supply when not in
use.
Note
:
It is advisable to clean any milk residuals from the appliance every time it has
been used, to safeguard health and prevent malfunctioning.
Heating milk without frothing it
•
Place the appliance on a fl at surface.
•
Remove the lid and place the mixer/milk frother insert inside the container.
Fill the container with the recommended amount of milk and refi t the lid.
Note
: To prevent milk overfl owing after being frothed, the recommended maximum amount
of milk must be below the level marked MAX MILK.
•
Place the container on the base, then connect the plug to a power socket.
•
Press the switch twice within 3 seconds; the indicator light blinks
RED
and the
appliance begins to heat the milk without frothing it.
The mixer insert stops when the
temperature of the milk has reached the set value. The indicator light goes off.
Note: The cycle can be stopped beforehand by pressing the switch once.
•
Open the lid and pour the hot milk when the appliance has stopped.
•
Always switch the appliance off and disconnect it from the power supply when not in
use.
Note
:
It is advisable to clean any milk residuals from the appliance every time it has
been used, to safeguard health and prevent malfunctioning.
