Caffe Borbone Didi, Руководство по эксплуатации

Страница: 45 / 56

45
ENGLISH
electrical distribution network (230 V – 50 Hz), insert the power plug into a power outlet,
then position the switch in position I (Fig. 7-C) to start the coffee group. To be able to switch
to coffee dispensing it is necessary to wait for the LED light inside the button to become
steady (Fig. 7-D).
At this point the machine is ready to dispense coffee.
STAND-BY
The Didì espresso coffee machine is equipped with an electronic temperature management
system. This system allows auto shutdown in the event of inactivity, thereby cancelling the
power consumption. When the machine is switched on, the button LED on the front will
flash slowly, 1 sec. on, 1 sec. off. This flashing indicates heating of the coffee group and
the active home mode (stand-by active). Once the optimal temperature has been reached,
the LED will stop flashing, instead emitting a steady light. Before this condition, it will not be
possible to dispense coffee. If the machine remains unused for a period of 30 minutes, the
electronic system will disconnect the voltage from the resistor.
Fig. 7-C Fig. 7-D