8
31-2000815 Rev. 0
Installation
1
REMOVE PACKAGING
CAUTION
Stand clear . The ends of the cut metal
banding may snap toward you .
■ Cut the metal banding. Lift the carton straight up.
■ Locate the two runner strips from the top of the
packaging . These strips will be used to protect the
kitchen floor during installation .
■ Remove corner posts. Dispose of packaging materials.
■ Remove grill/griddle covers, grill grate and burner grates.
■ Lift out cast-iron griddle flue cover, grease troughs
and pads .
■ Cut the ties holding the grill grate to the grill frame.
■ Lift off burner caps and remove foam pad, then lift off
burner heads and remove foam pad .
■ Open oven door(s) and remove packaging. Remove
shelf holding broiler pan, tape, literature package, shelf
lubricant and probe .
CAUTION
Doors and passageways leading to the
installation location require at least 32” opening . If the
opening is less than 32”, the oven door(s) and control
knobs must be removed .
REMOVE THE OVEN DOOR(S) ONLY IF NECESSARY
to move the range through the doorways . To prevent
damage to the sides of the range, it will be necessary to
pad the corners beneath the straps on the hand-truck .
To remove the oven door(s):
■ To remove the oven door(s):
■ Fully open the door.
■ Each hinge has a hinge lock. Pull the hinge.
■ Firmly grasp the door at the top sides.
■ Close the door to the near-vertical position.
■ Lift the door up and pull straight out.
Remove Foam Pads
Hinge
Lock
Griddle Flue Cover
Grease Troughs
Ties
Lock up and away from the front frame .
